Pyle PLTV7R Specifications download pdf (Page 16)

CONTROL

1. NAVIGATION AUDIO

(※ In case, you use an optional compatible Navigation System)

When a navigation system is connected to this unit, you can use the navigation system

properly after you adjust the navigation audio control. If you press NAVI button on the

remote control, the navigation mode will be displayed on the screen on any mode, when you

connect the navigation system to this unit, you should connect it through RGB connector at

the backside of this unit

NOTE

This is limited to only the unit with RGB connector.

1. Press MENU button to select CONTROL menu, and press SEARCH ▲/▼ button to

select NAVI AUDIO.

2. Press VOLUME ◀ or ▶ button to change the navigation audio as follows.

OFF -> ON -> AUTO

OFF : When a navigation system is not connected, the NAVI AUDIO should be set to OFF.

ON : When a navigation system is connected to this unit through RGB connector, the NAVI

AUDIO should be set to ON or AUTO.

When the NAVI AUDIO is set to ON on the navigation mode, only the navigation

audio is heard through the speakers.

AUTO : When the NAVI AUDIO is set to AUTO on the navigation mode, the previous mode

audio (TV) is heard through the speakers, when the navigation audio comes on, the

previous mode audio is muted and the navigation audio is heard through the speakers.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 30 31

No comments

Pyle PLTV7R Specifications Page 16