43
PLAD412 4 Channel 1000 Watt Bridgeable MOSFET Amplier
4x100W RMS at 4 Ohms•
4x250W MAX at 4 Ohms•
2x400W MAX at 4 Ohms Bridged•
4x150W RMS at 2 Ohms•
Electronic Crossover Network•
Bass Boost Circuit•
Bridgeable at 4 Ohms•
2 Ohm Stereo Stable•
Tri-Mode Capable•
Gold Plated RCA Inputs•
Line Outs for 1 and 2 Channel•
Low Pass Filter Control•
High Pass Filter Control•
Remote Bass Level Control•
Power and Protection LED Indicators•
Red Lighting Illumination•
Side Leg Mounting•
THD: S/N Ratio: >90dB•
Input Sensitivity : 100mV ~4V•
Channel Separation : >65dB•
Freq. Response : 10Hz ~ 30KHz•
Patent Pending•
Soft Turn-on/Turn-off•
Dimensions : 8.6’’(W) x 2.74’’(H) x 11.4’’(L)•
PLAD413 4 Channel 2000 Watt Bridgeable MOSFET Amplier
4x200W RMS at 4 Ohms•
4x500W MAX at 4 Ohms•
2x800W MAX at 4 Ohms Bridged•
4x350W RMS at 2 Ohms•
Electronic Crossover Network•
Bass Boost Circuit•
Bridgeable at 4 Ohms•
2 Ohm Stereo Stable•
Tri-Mode Capable•
Gold Plated RCA Inputs•
Line Outs for 1 and 2 Channel•
Low Pass Filter Control•
High Pass Filter Control•
Remote Bass Level Control•
Power and Protection LED Indicators•
Red Lighting Illumination•
Side Leg Mounting•
THD: S/N Ratio: >90dB•
Input Sensitivity : 100mV ~4V•
Channel Separation : >65dB•
Freq. Response : 10Hz ~ 30KHz•
Patent Pending•
Soft Turn-on/Turn-off•
Dimensions : 8.6’’(W) x 2.74’’(H) x 12.6’’(L)•
PLAD618 6 Channel 2000 Watt Bridgeable MOSFET Amplier
4x100W+2x250W RMS at 4 Ohms•
4x250W+2x500W MAX at 4 Ohms•
2x400W+1x900W MAX at 4 Ohms Bridged•
4x175W+1x400W RMS at 2 Ohms•
Electronic Crossover Network•
Bass Boost Circuit•
Bridgeable at 4 Ohms•
2 Ohm Stereo Stable•
Tri-Mode Capable•
Gold Plated RCA Inputs•
Line Outs for 1 and 2 Channel•
Low Pass Filter Control•
High Pass Filter Control•
Remote Bass Level Control•
Power and Protection LED Indicators•
Red Lighting Illumination•
Side Leg Mounting•
THD: S/N Ratio: >90dB•
Input Sensitivity : 100mV ~4V•
Channel Separation : >65dB•
Freq. Response : 10Hz ~ 30KHz•
Patent Pending•
Soft Turn-on/Turn-off•
Dimensions : 8.6’’(W) x 2.74’’(H) x 19.7’’(L)•
PLAD3300D 3600 Watt Mono Block MOSFET Digital Amplier
1x600W RMS at 4 Ohms•
1x1800W MAX at 2 Ohms•
1x3600W MAX at 1.3 Ohms•
Mono Block Subwoofer Amplier•
1 Ohm Stereo Stable•
MOSFET Power Supply•
PWM (Pulse-Width-Modulated) System•
Double Sided Epoxy PCB Circuit Board•
Gold Plated RCA Inputs•
Custom Terminal Block for Speaker Connections•
Thermal, Overload & Short Protection•
Variable Low pass Filter (50Hz~150Hz,24dB/Octave)•
Variable Subsonic Filter (15Hz~40Hz,24dB/Octave)•
Phase Control 0-180 Degree•
Remote Bass Level Control•
Input Impedance:10K Ohms•
Soft Turn-on/Turn-off •
Side Leg Mounting•
Red Lighting Illumination•
THD: & 0.1%. •
S/N Ratio: & 90dB•
Input Sensitivity : 200mV ~8V•
Freq. Response : 15Hz ~ 150KHz•
Patent Pending•
Heavy Duty Power Coated Heatsink•
Dimensions : 8.6’’(W) x 2.74’’(H) x 15’’(L)•
Amplifiers
Comments to this Manuals